KLEIN ET910 USB Digital Meter and Tester, USB-A (Type A) 0-9264469139-3

Product Description

---

KLEIN ET910 USB Digital Meter and Tester, USB-A (Type A) 0-9264469139-3KLEIN ET910 USB Digital Meter and Tester, USB-A (Type A) 0-9264469139-3P/N ET910 USB Digital Meter and TesterUSB-A (Type A) Overall Length:4.31” (11 cm)Overall Height:0.98” (2.5 cm)Overall Width:2.15” (5.5 cm)Weight:2.80 oz (79.4 g)UPC: 0926446913933 to 20V DC; Current: 0.05 to 3A (monitoring mode)Built-in test loads of 0.5A, 1A, 2A, and 3A; no external test load requiredContinuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated)Tests most common standard USB-A ports, including Qualcomm Quick Charge® portsStore and recall up to 10 readingsVoltage and current overload detectionHi-resolution LCD for clear visibility in environments with low ambient lightingDurable cable to allow easy access to hard-to-reach portsRugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demandsBuilt to withstand a 6.6-Foot (2m) dropNo batteries needed; powered by the USB port being testedWarningsTo ensure safe operation and service of this meter, follow all instructions. Failure to observe warnings can result in severe injury or death.This meter will NOT display current below 50 milliamperes, even if it is allowing this to pass through. NOTE: The display will show zero current.Do NOT use with ports that operate outside of the rated voltage and current. NEVER use on a circuit with voltage or current that exceeds the maximums specified for this device.Do NOT use during electrical storms or in wet weather. Do NOT use if meter appears damaged. Use caution when working with voltages above 25V RMS or 24V DC. Such voltages pose a shock hazard.