Festool Bit Cassette

Festool’s bit cassettes work nicely to store drill and driver bits, but are really at their best when installed in a SYS3 Systainer-Attic with Lid Compartments . They’ll keep your bits organized and readily available.

Festool’s Centrotec bits work in the Festool Centrotec Chuck and standard drill chucks.

Festool offers the cassettes with bits in several assortments.

Set Assortment Contents

Bit cassette BKS SYS3 50mm CE F – 50mm Centrotec Driver Bits

50mm (~1-15/16″) Centrotec Driver Bits

• PH1 – Phillips 1
• PH2 – Phillips 2
• PH3 – Phillips 3
• PZ1 – Pozidrive 1
• PZ2 – Pozidrive 2
• PZ3 – Pozidrive 3
• TX10 – Torx 10
• TX15 – Torx 15
• TX20 – Torx 20
• TX25 – Torx 25
• TX30 – Torx 30
• TX40 – Torx 40

Bit cassette BKS SYS3 100mm CE F – 100mm Centrotec Driver Bits

100mm (~3-15/16″) Centrotec Driver Bits

• PH1 – Phillips 1
• PH2 – Phillips 2
• PH3 – Phillips 3
• SQ1 – Square 1
• SQ2 – Square 2
• SQ3 – Square 3

Bit cassette BKS SYS3 25mm F – Insert Driver Bits

25mm (~1″) 1/4″ Hex Insert Driver Bits (Two each)

• PH1 – Phillips 1
• PH2 – Phillips 2
• PH3 – Phillips 3
• PZ1 – Pozidrive 1
• PZ2 – Pozidrive 2
• PZ3 – Pozidrive 3
• TX10 – Torx 10
• TX15 – Torx 15
• TX20 – Torx 20
• TX25 – Torx 25
• TX30 – Torx 30
• TX40 – Torx 40

Bit Set BKS SYS3 D3-8 K CE/W F – Stubby Centrotec Drills and Insert Driver Bits

Centrotec Brad Point Drill Bits for drilling clean holes in wood.

• 3mm – ~1/8″
• 4mm – ~5/32″
• 5mm – ~3/16″ – Two included
• 6mm – ~15/64″
• 8mm – ~5/16″
• Approximate inch equivalents are for reference only, bits are precision ground to metric sizes.

25mm (~1″) 1/4″ Hex Insert Driver Bits (One each)

• PH1 – Phillips 1
• PH2 – Phillips 2
• PH3 – Phillips 3
• PZ1 – Pozidrive 1
• PZ2 – Pozidrive 2
• SQ1 – Square 1
• SQ1 – Square 2
• TX15 – Torx 15
• TX20 – Torx 20
• TX25 – Torx 25
• TX30 – Torx 30
• TX40 – Torx 40